We do have a couple of options that you may be interested in, like the Camco RV Adjustable Screen Door Standard Grille # CAM43980, which is meant to fit a variety of doors measuring 20" to 29" tall, and 24" wide.
So, if you measure the size screen you need and it falls within these measurements, then # CAM43980 will work great for you.
Or
If you are able to provide some measurements, I'd be happy to help. view full answer...
From what I was able to find with my research, the 2021 R-Pod 202-80 has a length of 25 feet, so I recommend using the Adco SFS AquaShed Cover for Travel Trailer - Up to 26' Long - Gray # 290-52243. This Adco cover will fit well on your 25 foot trailer and provide you with good protection from the elements since it beads water on contact but is also breathable to keep mildew from forming on the coach. This cover also comes with a storage bag to keep the cover protected when it's not being... view full answer...
Yes, Lippert does make exactly what you're looking for, for your 2013 Forest River Rockwood Signature Ultra Lite.
Check out the:
-SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames # LC713662.
These steps will work with an entry height of 22-28", a doorway width of 24", and has a 400-lbs capacity.
Additionally, these steps are manually operated that easily fold down and stow up into the RV for simple storage, and also has an extra deep top step for a safe and easier entry and exit. view full answer...
The Adco Olefin HD All-Climate # AD99ZR is an all weather cover, that will protect your 5th wheel against rain, wind, dirt, and sun. This cover works best in long term storage in all climates.
However, based on my research your trailer is listed at 150" which may not be compatible with this cover. To be sure, I recommend measuring from the bottom of the trailer to the top of the trailer; and from the front of the trailer to the back. This will ensure that you have the correct measurements... view full answer...
For your 2020 Forest River Geo Pro I recommend using the Adjustable Width Trailer Hitch Receiver # 13703, this will fit most trailer frames; spanning from 22" to 72". This hitch will use the bolt holes on the frame of your trailer to mount, allowing you to have the clearance needed for your black tank.
You will need at least 12" of clearance from your black tank, to your hitch for the mounting brackets. view full answer...
There are no brackets that are offered separately for the Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs # UF48-979006. They are only included with the jacks, so if you are in the need of new brackets, you will need to get a new set of jacks.
I have added links to video reviews of the jacks for you to check out as well. view full answer...
Before installing The Bearing Buddy Bearing Protectors # BB1781 I would recommend inspecting the bearings and clean or repack them if need be before you install the bearing protectors. The protectors have a spring loaded seal that keeps moisture and debris out of the bearings. The pressurized grease from the bearing buddy will maintain bearing function as long as the seal on the hub stays functional.
When filling the Bearing Buddy # BB1781 with grease you need to fill them up into grease... view full answer...
The only thing that would stop you from moving up would be the clearance that adding tires with 1"+ of added height to your setup; you'd want to start by measuring from the top of your current tires to the frame and the top of the wheel well. You'll typically need at least 3" of clearance for enough travel for the tires and suspension. Going with larger tires would also mean changing the wheels, so it's also something to consider.
With that said, you may just want to go up to a higher... view full answer...
Thanks for the info, I did some research and it looks like the 9105384475 model number comes back to a Dometic Brisk II.
With that being said, to find the correct replacement you'll just need to check what style pin it has. If it has a 6 pin then I recommend going with the Furrion Chill HE Replacement RV Air Conditioner Unit for Furrion Setup # FR58PR, but if it has a 9 pin I recommend going with the Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup # FR42PV.
Attached... view full answer...
Both of our single axle, 3-1/2" axle lift kits, like # LC382741 you mention, are only rated for 3,500-lb axles.
The best I can offer, is an over-under kit like the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 for 2-3/8" diameter axles, or # K71-385-00 for 3" diameter axles.
This will provide your trailer with a lift that is the thickness of your axles plus your leaf springs. You would just need to measure the thickness of your springs and axle to know how much lift you'd get. view full answer...
To get the combination you're desiring you'll need to get the tires and wheels separately and then have them mounted as this currently (December 2022) isn't a combination we are able to offer.
We have the 15" Aluminum Liger wheel available in Black # LH34FR or Gunmetal Gray # LH35FR and then for a tire we have the Westlake ST235/75R15 Radial Off-Road Trailer Tire - Load Range D # WST54FR but I only recommend using that tire if your other tires are also off-road as well.
Any tire shop... view full answer...
There is a brake controller port on your Ford-based Forest River Class A motorhome but it is tucked away behind the instrument cluster and can be tough to find. Ford offers a document, Q-206, that can help you locate it. I also included a photo of the chassis to assist; this shows the placement of the port within the chassis wiring.
To connect a controller such as the excellent Prodigy P3 # 90195 you will use quick-connect harness # 3035-P. The P3 offers easy set-up, user-friendly features... view full answer...
What it sounds like you're looking for is the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 which installs on the front of your trailer in-front of your propane tanks.
This rack will do essentially the same thing as what you're looking to do, and it will guarantee that you have enough room to remove and access your batteries since the rack won't even be near it.
If not, then we also have the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275... view full answer...
As long as your trailer does not exceed 800 pounds, I recommend the 800-pound bars over the 1,000 pound bars. This is because you are right on the money when you conclude that the 1,000 pound trunnions with your trailer will be a stiff ride.
Since you say that you have an Fast Way e2 spring bar system, the upgraded bars you need are the Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems # FA92-01-0899. These bars are designed to fit your current Fastway e2 weight... view full answer...
We don't offer a 235/75-15 tire pre-mounted on a wheel with the bolt pattern you're looking for, but we do offer an off-road radial part # WST54FR that could be purchased separately from any of the 15x6 aluminum trailer wheels we offer with a 5 on 4-1/2 bolt pattern such as the Lionshead # LH35FR wheel.
The tire is a 235/75-15 radial in a load range D, which has a capacity of 2910 lbs per tire/5820 lbs per axle.
I've linked to videos for the wheels and tire mentioned above. view full answer...
As you noted, you can't have the propane supply going through two regulators as it would not supply the correct pressure that your griddle needs to function properly. It doesn't look like the the propane regulator on the 36-inch Blackstone griddle is removable; therefore, you have two options.
The first option you have is to not use the quick disconnect port on your trailer and instead tap into the propane supply before it goes through the regulator with a combination of the MB Sturgis... view full answer...
All of the cables and connectors to connect the:
-Go Power DuraLite Portable Solar Panel Expansion # GP76FR are included in the kit.
This kit includes quick connectors, ring terminals, a digital solar controller, battery clamps, XLR-Style solar plug, and a canvas kit bag.
This kit will work most portable power stations, and will also work with pre-wired Furrion solar setups as well.
Additionally, since it uses its own 30 amp controller it won't be able to be tied into your existing... view full answer...
Based on the information you have provided me I recommend a conversion kit that moves your axles from above your leaf springs to below. This will raise the height of your trailer by the diameter of the axle and the thickness of the leaf spring pack. You should be able to get right around 3"-3 1/2" of lift depending on the diameter of your 2020 Salem Hemisphere Elite Fifth Wheel's axles.
If your trailer has 3" diameter axles you will need the Dexter Trailer Springs Over-Under Conversion... view full answer...
We do not have a KW1-style replacement water filter, but I may have a better solution for you. The KW1 Style filter is unique to some Forest River RV's like your 2014 Cedar Creek and as such may not be as easy to find as more common styles.
If it were me, I would replace the filter houseing with a Camco # CAM40631 Premium Water Filter System that filters out contaminates above 5 microns in size - same as KW1 spec. Works in any orientation including laying on the ground. (Remember when... view full answer...
Since you aren't interested in attaching new hangers to your 2020 Salem Hemisphere 34 RL I recommend the Correct Track Trailer Alignment and Lift Kit - Tandem Axle item # RR23QX. It works with your existing leaf spring suspension system. The brackets attach to the hangers and supply new, lower mounting point for springs, which results in a taller ride height. This will give you up to a 2 1/4" lift and is the only option available without removing your old hangers and attaching new ones... view full answer...
Go To Results